RYVER Epoxy R-CAST 2.0

New and improved! R-CAST 2.0 is a clear epoxy resin specially designed for pours greater than 1/2" and up to 2 1/2". The use of fans is strongly recommended for thick castings.

• Improved cure time, 3-5 days
• Clear and bubble-free.
• Anti-yellowing UV resin
• Improved hardness adapts to the movements of the wood
• Solvent-free
  

CHEMICAL ADHESION: To allow maximum adhesion, we recommend pouring the successive layers when the product is dry to the touch, but still soft (texture similar to Jello). Normally, this texture is obtained about 48 hours after pouring. * Never pour if the first layer is still liquid*.

MECHANICAL ADHESION: If the R-CAST is dry (more than 84 hours), we recommend sanding lightly (120 grit) the first layer. Thus, you will get better adhesion between the layers.

Refer to the technical data sheet for more details