RYVER R-PROTECT 1.5G

R-PROTECT is a poly-aspartic specially designed to offer optimal protection on your project.

• Impact resistant.
• Increased resistance against graffiti.
• UV stable, no yellowing
  

SIMPLE PREPARATION

Prior to applying R-Protect, sand all surfaces (including sides and bottom) with 120-grit abrasive for good adhesion, allow any airborne dust to settle, and clean the surface so it's free of dust.

FOR THIN LAYERS

R-Protect must be applied in thin layers otherwise micro bubbles will be produced. Bubbles in thin coats can be released with a torch.

FAST-DRYING

After mixing for 3-4 minutes, the product must be applied within 10 minutes. The short working time minimizes the chances that airborne contaminants such as dust or bugs can settle into the finish.

Wait at least 10 days before using the surface.